2.
Disconnect the damper (B) from the glove box (A).
Press the OFF switch more then 4 times within 2 seconds while pressing the MODE switch.
Display | Fail description |
00 | Normal |
50 | Cluster ion generator fault |
* Diagnostic procedure refer to DTC code.
Disconnect the negative (-) battery terminal.
Disconnect the damper (B) from the glove box (A).
Remove the glove box (A) from the lift (B).
Disconnect the pin (A), then remove the glove box (B).
Remove the glove box housing (A).
Loosen the screws and then remove the cluster ion generator (A).
Installation is the reverse order of removal.
