Ignition "OFF"

Disconnect the intake actuator connector.

Verify that the actuator operates to the recirculation position when connecting 12V to the terminal 3 and grounding terminal 4.

Verify that the intake actuator operates to the fresh position when connecting in the reverse.

If the intake actuator is not operated well, substitute with a known-good intake actuator and check for proper operation.

If the problem is corrected, replace the intake actuator.

Disconnect the negative (-) battery terminal.

Remove the glove box (Refer to BD- Crach pad).

Disconnect the intake actuator connector.

Loosen the mounting screw and then remove the intake actuator (A) from the blower unit.

Installation is the reverse order of removal.