2.
Install the spring (A), the upper pad (B) and the lower pad (C).
Pretighten the mounting bolt of the cross member and the rear lower arm.
Install the spring (A), the upper pad (B) and the lower pad (C).
Install the mounting bolt (B) of the rear lower arm (A) and the rear carrier with a specified torque, while supporting the lower arm (A) with a jack as shown in the illustration. Tighten the mounting bolt (C) of the cross member and the rear lower arm with a specified torque.
Tightening torque
: Bolt(B)
137.3 ~ 156.9N.m (14 ~ 16kgf.m, 101.3 ~ 115.7lb-ft)
: Nut(C)
137.3 ~ 156.9N.m (14 ~ 16kgf.m, 101.3 ~ 115.7lb-ft)
After checking the distance(453±10mm(17.83±0.39in)) between the wheel housing garnish (A) and the hub assembly (B) as shown in the illustration, tighten the mounting bolts and nuts of rear chassis part with specified torque.
Install the wheel and tire (A) to the rear hub (B).
Tightening torque
: 88.3 ~ 107.9N.m (9 ~ 11kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage the hub bolts (C) when installing the rear wheel and tire (A).
