10198321

Drain the engine oil.

Remove the lower oil pan (A).

Insert the blade of SST(09215-3C000) between the upper oil pan and lower oil pan. Cut off applied sealer and remove the lower oil pan.

note

●

Insert the SST between the oil pan and the ladder frame by tapping it with a plastic hammer in the direction of arrow.

●

After tapping the SST with a plastic hammer along the direction of arrow around more than 2/3 edge of the oil pan, remove it from the ladder frame.

●

Do not turn over the SST abruptly without tapping. It be result in damage of the SST.

●

Be careful not to damage the contact surfaces of Upper oil pan and lower oil pan.

Remove the oil pump chain cover (A).

Remove the oil pump chain sprocket (A).

Remove the oil pump (A).

Remove the water temperature control assembly. (Refer to Cooling system in this group)

Remove the intake manifold. (Refer to Intake and exhaust system in this group)

Wait for 5 minutes after loosening the oil filter cap to drain well the oil in the oil filter.

Remove the water pipe (A).

Remove the oil filter body (A).