4.
Monitor "FUEL TEMPERATURE" parameter on the scan tool.
Specification : Current fuel temperature is displayed.
Fig 1) FTS data.
☞ Check if too high or low temperature is displayed. (too high or low temperature is abnormal value.)
Connect scan tool with 'DATA LINK CONNECTOR'(DLC).
Warm engine up to normal operating temperature.
Turn all the electrical devices including air conditioner OFF.
Monitor "FUEL TEMPERATURE" parameter on the scan tool.
Specification : Current fuel temperature is displayed.
Fig 1) FTS data.
☞ Check if too high or low temperature is displayed. (too high or low temperature is abnormal value.)
