4.
Perform "MIL (ENGINE CHECK)" of "ACTUATION TEST" with scan tool.
Specification : MIL lamp turned on after start button pressed.
Fig.1) Actuation Test of MIL lamp : MIL lamp turned on after start button pressed.
Connect scan tool with 'DATA LINK CONNECTOR'(DLC).
Warm engine up to normal operating temperature.
Turn all the electrical devices including air conditioner OFF.
Perform "MIL (ENGINE CHECK)" of "ACTUATION TEST" with scan tool.
Specification : MIL lamp turned on after start button pressed.
Fig.1) Actuation Test of MIL lamp : MIL lamp turned on after start button pressed.
