4.
Operate "TPMS Lamp" item of the Actuation Test by force.
Specification: After the warning lamp blinks for 1 minute, it turns off.
Fig.1) Displayed data when the "TPMS Lamp" turns on by force.
Park the vehicle on an even ground.
Connect GDS to Data Link Connector(DLC).
IG "ON"
Operate "TPMS Lamp" item of the Actuation Test by force.
Specification: After the warning lamp blinks for 1 minute, it turns off.
Fig.1) Displayed data when the "TPMS Lamp" turns on by force.
Is the service data shown normally?
 | ▶ Fault is intermittently caused then go to "Verification of Vehicle Repair" procedure. |
 | ▶ Go to Next procedure. |
