Installation is reverse of removal.
When installing the high pressure fuel pipe, apply the specified tightening torques with the special service tool [SST No.: 09314-3A000].
When installing the high pressure fuel pipe connecting the common rail and injector, follow the below procedure.
Temporarily install the nuts on common rail and injector
Install the injector side and common rail side sequentially
Injector clamp installation bolt: 29.4 ~ 33.4 N.m (3.0 ~ 3.4 kgf.m, 27.1 ~ 24.6 lb-ft)
High pressure fuel pipe installation nut: 24.5 ~ 28.4 N.m (2.5 ~ 2.9 kgf.m, 18.1 ~ 21.0 lb-ft)
[CONNECTION-INJECTOR RETURN LINE]
With the plug bush fully raised, vertically install the plug to the injector nipple until "Click" sound generates.
Press the plug bush downward until "Click" sound generates.
