2.
Remove the under cover (A).
Remove the battery and the battery tray. (Refer to "Charging system" in EE group.)
Remove the under cover (A).
Replace new gasket and the plug after draining the automatic transaxle fluid by removing the drain plug.
(Refer to "Automatic transaxle assembly" in this group.)
Remove the oil pan cover (A).
Tightening torque:
13 ~ 15 N.m (1.3 ~ 1.5 kgf.m, 9.4 ~ 10.9 lb-ft)
Remove installation bolts in the engin room first and then remove others under the vehicle.
Remove the plate and the detend spring (A)after removing the bolt.
Tightening torque:
23 ~ 25 N.m (2.3 ~ 2.5 kgf.m, 16.6 ~ 18.1 lb-ft)
Remove the bolt (3ea) after disconnecting the solenoid valve (B) connector and the oil temperature sensor connector (A).
Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Remove the valve body assembly (A).
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft
