2.
Remove the under cover (A).
Remove the battery and the battery tray. (Refer to "Charging system" in EE group.)
Remove the under cover (A).
Replace new gasket and the plug after drining the automatic transaxle fluid by removing the drain plug.
(Refer to "Automatic transaxle assembly" in this group.)
Remove the valve body cover (A).
Tightening torque:
12.8 ~ 14.7 N.m (1.3 ~ 1.5 kgf.m, 9.4 ~ 10.9 lb-ft)
Remove installation bolts in the engin room first and then remove others under the vehicle.
Disconnect the oil temperature sensor connector (A).
Remove the oil temperature sensor (A) after removing a bolt.
Be careful not to damage the harness lock connector.
