2.
Remove the rear wheel and tire (A) from the rear hub (B).
caution
Be careful not to damage to the hub bolts (C) when removing the rear wheel and tire (A).
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
Remove the rear wheel and tire (A) from the rear hub (B).
Be careful not to damage to the hub bolts (C) when removing the rear wheel and tire (A).
Remove the split pin (A), then remove castle nut (B) and washer (C) from the front hub under applying the brake.
Remove the mounting bolt (B) of the rear lower arm(A) and the rear carrier, while supporting the lower arm (A) with a jack as shown in the illustration. Loosen the mounting bolt (C) of the cross member and the rear lower arm.
Remove the spring (A), the upper pad (B) and the lower pad (C).
Remove the rear shock absorber (A).
Remove the assist arm (A) and the trailing arm (B) from the rear axle carrier.
Remove the rear assist arm ball joint by using the special tool(09568-4A000).
Remove the rear stabilizer link (A) from the rear axle carrier.
Remove the brake caliper mounting bolts (A), and then place the brake caliper assembly (B) with wire as shown in the illustration.
Remove the wheel speed sensor (A) and the parking brake cable (B) from the rear axle carrier.
Remove the split pin (A) and the castle nut (B) from the rear upper arm ball joint (C), and then remove the rear upper arm ball joint (C) by using the special tool(09568-34000).
Remove the rear axle carrier assembly.
