1.
Install the water pump cover (A) and a new gasket (B).
Tightening torque :
19.6 ~ 24.5N.m (2.0 ~ 2.5kgf.m, 14.5 ~ 18.1lb-ft)
Install the water pump cover (A) and a new gasket (B).
Tightening torque :
19.6 ~ 24.5N.m (2.0 ~ 2.5kgf.m, 14.5 ~ 18.1lb-ft)
Install the water inlet pipe (A) with a new O-ring (B).
Tightening torque :
19.6 ~ 24.5N.m (2.0 ~ 2.5kgf.m, 14.5 ~ 18.1lb-ft)
When installing the water pipe into water housing, keep the surface of O-ring from dust and oil and be careful no to damage the surface of the O-ring. And apply a coat of alhorm(BW-0431) or equivalent (not engine oil).
Install the water pump (A) with a new gasket (B).
Tightening torque :
19.6 ~ 24.5N.m (2.0 ~ 2.5kgf.m, 14.5 ~ 18.1lb-ft)
Install the water pump pulley (A).
Tightening torque :
7.8 ~ 11.8N.m (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7lb-ft)
Install the drive belt (A).
Fill with engine coolant.
Start engine and check for leaks.
Recheck engine coolant level.
