Installation
1.

Install the rear assist arm (A) to the rear carrier.

Tightening torque

Bolt(B)

: 137.3 ~ 156.9N.m (14 ~ 16kgf.m, 101.3 ~ 115.7lb-ft)

Nut(C)

: 98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

note

After checking the distance(453±10mm(17.83±0.39in)) between the wheel housing garnish (A) and the hub assembly (B) as shown in the illustration, tighten the mounting bolts and nuts of rear chassis part with specified torque.

2.

Install the wheel and tire (A) to the rear hub (B).

Tightening torque

: 88.3 ~ 107.9N.m (9 ~ 11kgf.m, 65.1 ~ 79.6lb-ft)

caution

Be careful not to damage the hub bolts (C) when installing the rear wheel and tire (A).

Яндекс.Метрика