Component Inspection
■ Check IATS(intake air temperature sensor) resistance
1.

IG key OFF.

2.

Disconnect IATS(intake air temperature sensor) connector.

3.

Check resistance between 'Temp. signal' terminal and 'Ground' terminal of IATS(intake air temperature sensor) connector. (between BPS and intercooler)

Specification

Temp.

- 40℃

-20℃

0℃

20℃

40℃

60℃

80℃

Resistance

40.93~48.35KΩ

13.89~16.03KΩ

5.38~6.09KΩ

2.31~2.57KΩ

1.08~1.21KΩ

0.54~0.62KΩ

0.29~0.34KΩ

note
To view Flash content, you need to install the appropriate browser extension
4.

Is the measured value within specification?

▶ Go to "Verification of Vehicle Repair" procedure.

▶ Replaces IATS(intake air temperature sensor), and go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика