4.
Remove the fuel pump service cover (A).
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the 2nd seat (Refer to "SEAT" in BD group).
Open the carpet for the fuel pump.
Remove the fuel pump service cover (A).
Disconnect the fuel pump connector (A) and the fuel feed tube quick-connector (B).
Disconnect the fuel return tube quick-connector (C) and suction tube quick-connector (D).
Remove the fuel pump (C) after removing the plate cover (B) with SST (A) [SST No.: 09310-3P100] from the fuel tank.
Installation is reverse of removal.
Fuel pump plate cover installation:
58.9 ~ 68.7 N.m (6.0 ~ 7.0 kgf.m, 43.4 ~ 50.6 lb-ft)
Check the groove when installing the fuel pump.
