1.
Remove the engine cover (A).
Remove the engine cover (A).
Remove the air cleaner assembly.
Remove the air duct (A).
Disconnect the air flow sensor (AFS) connector (B).
Disconnect the breather hose (C).
Remove the intake air hose (D) and air cleaner assembly (E).
Tightening torque :
Clamps: 2.9 ~ 4.9N.m (0.3 ~ 0.5kgf.m, 2.2 ~ 3.6lb-ft)
Bolts: 7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)
Disconnect the terminals (A) from the battery and remove the battery (B).
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Remove the battery tray (A).
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Disconnect the intake air temperature sensor connector (A) and remove the intercooler inlet pipe&hose (B) and outlet pipe&hose (C).
Tightening torque :
Clamps: 4.9 ~ 6.9N.m (0.5 ~ 0.7kgf.m, 3.6 ~ 5.1lb-ft)
Bolt: 9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Disconnect the boost pressure sensor (BPS) connector (A) and remove the intercooler inlet pipe & hose (B) and outlet pipe & hose (C).
Remove the front bumper. (Refer to BD group)
Remove the upper cover (A).
Remove the upper bracket (A) and then remove the intercooler assembly.
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Installation is the reverse order of removal.
