The HECU sets this code if TCM message is received while transmission type in EMS is manual.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
CAN message monitoring | 1. Check PCM(ECM) system |
Enabl Conditions |
•
In case that the information about transmission in the EMS and TCU is different under normal voltage condition. After power up and receiving the signal of the EMS, the monitoring starts. | |
Fail Safe |
•
ABS : Inhibit the ABS control.
•
ESP(ESC) : Inhibit the ESP(ESC)/DBC/AVH control. | |
MIL |
•
ABS : The ABS warning lamp is activated.
•
ESP(ESC) : The ESP(ESC)/DBC warning lamp is activated. The AVH waring lmap is activated in case of the vehicle equipped with AVH. | |
Reset Condition |
•
Normal after IG turned on again |
