ECM sets P2610 when detects internal error.
Item | Detecting Condition | Possible Cause | |
Case1 | DTC Strategy |
•
During engine running check accuracy of time measurement by Engine-off timer micro-com. | 1. ECM |
Enable Condition |
•
Time after IG KEY "ON" has passed 10 second. | ||
Threshold Value |
•
Compare Engine-off timer time measurement with Engine running timer | ||
Diagnostic Time |
•
Immediately | ||
Case2 | DTC Strategy |
•
During Engine stop, check Engine-off timer start increment. | |
Enable Condition |
•
Engine speed is higher than 32rpm or Engine speed is lower than 32rpm
•
Battery voltage is between 11V and 16V | ||
Threshold Value |
•
Engine-off timer after 2 sec. engine stop time is between 1sec and 4sec. | ||
Diagnostic Time |
•
2 sec | ||
Mil On Condition |
•
3 driving cycle | ||
