P1587 is set when ECM is recognized as 1)A/T but CAN communication signal is not transmitted from TCM 2)M/T but CAN communication signal is transmitted from TCM. After checking if A/T, M/T auto recognition terminal is normal for each vehicle option, if no problem is detected, check poor connection in CAN communication circuit or CAN communication problem of TCM.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Voltage monitoring |
•
A/T, M/T recognition terminal circuit
•
CAN communication line circuit
•
TCM component failure
•
ECM component failure | ||
Enable Conditions |
•
Engine run | |||
Threshold Value |
•
When TCM signal(through CAN communication) opposite to recognized data(A/T or M/T) at ECM is detected. | |||
Diagnostic Time |
•
1.0 sec. | |||
Fail Safe | Fuel Cut | NO |
•
Glow Lamp blinks. | |
EGR Off | NO | |||
Fuel Limit | NO | |||
Check Lamp | NO | |||
