P0113 is set when the voltage above 4886mV - maximum output voltage of IATS - is detected for more than 1.0 sec. This code is due to 1) open or 2) short to ground or 3) short to battery in IATS signal circuit.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Voltage monitoring |
•
IATS circuit
•
IATS component | ||
Enable Conditions |
•
IG KEY "ON" | |||
Threshold Value |
•
When output signal is above the maximum value (above 3.200mV) | |||
Diagnostic Time |
•
1 sec. | |||
Fail Safe | Fuel cut | NO |
•
Intake air temperature is regarded as 50℃ | |
EGR Off | NO | |||
Fuel Limit | NO | |||
MIL | NO | |||
