P0192 is set when RPS output voltage is below the minimum value of 254mV for more than 0.2 sec. This code is due to the open in power circuit or the short to ground in signal circuit.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Voltage monitoring |
•
RPS circuit
•
RPS component | ||
Enable Conditions |
•
Engine running | |||
Threshold Value |
•
Output sinal below minimum value (below 189mV) | |||
Diagnostic Time |
•
200ms | |||
Fail Safe | Fuel cut | NO |
•
Rail press. Sensor value fixed at 330bar | |
EGR Off | NO | |||
Fuel Limit | YES | |||
Check Lamp | YES | |||
