10997044

Component Inspection

1.

IG KEY "OFF", ENGINE "OFF".

2.

Disconnect APS connector.

3.

Check resistance for each terminal refering to Resistance characteristic table.

Specification : Resistance characteristic table for each terminal

	Checking Point	Resistance(KΩ 20℃ )		Characteristic	Component Connector Shape
	Checking Point	Pedal Depressed	Pedal Released	Characteristic	Component Connector Shape
APS 1	6(power)-4(ground)	1.0±0.1KΩ	1.0±0.1KΩ	Unchanged
	6(power)-5(signal)	1.8±0.1KΩ	1.1±0.1KΩ	Resistance drops
	5(signal)-4(ground)	1.1±0.1KΩ	1.8±0.1KΩ	Resistance rises
APS 2	1(power)-3(ground)	2.0±0.1KΩ	2.0±0.1KΩ	Unchanged
	2(power)2(signal)	2.9±0.1KΩ	2.1±0.1KΩ	Resistance drops
	2(signal)-3(ground)	1.1±0.1KΩ	1.8±0.1KΩ	Resistance rises

4.

Are resistances for each terminal measured correctly?

	▶ Go to "Verification of Vehicle Rapair".
	▶ Replace APS and go to "Verification of Vehicle Rapair".