P062D is set when the problem of transforming system 1 for injector contol occurs. This code is due to the failure of transforming system inside of ECM.
※ If battery voltage is low, this code can be set. Therefore, beforehand, check DTC code relevant to battery voltage and charging system.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Voltage monitoring |
•
Injector circuit short to ground
•
ECM internal error | ||
Enable Conditions |
•
Engine running | |||
Threshold Value |
•
Bank1(Injector #1, #3) circuit short to ground or Monitored HSD voltage below 0.8V | |||
Diagnostic Time |
•
Immediately | |||
Fail Safe | Fuel cut | YES | ||
EGR Off | NO | |||
Fuel Limit | NO | |||
Check Lamp | YES | |||
