P062E is set when the problem of transforming system 2 for injector contol occurs. This code is due to the failure of transforming system inside of ECM.
※ If battery voltage is low, this code can be set. Therefore, beforehand, check DTC code relevant to battery voltage and charging system.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Voltage monitoring |
•
Injector circuit short to ground
•
ECM internal error | ||
Enable Conditions |
•
Engine running | |||
Threshold Value |
•
Bank2(Injector #2, #4) circuit short to ground or Monitored HSD voltage above 3.0V | |||
Diagnostic Time |
•
Immediately. | |||
Fail Safe | Fuel cut | YES | ||
EGR Off | NO | |||
Fuel Limit | NO | |||
Check Lamp | YES | |||
