10997435

1.

Connect GDS to Data Link Connector(DLC).

2.

Ignition "ON" & Engine "ON".

3.

Driving 1st speed to 6th speed at D-range.

4.

Selet "Current Data" mode and monitor "Torque converter clutch" parameter.

Specification : See below data

5.

Is Torque conveter clutch value within specification?

	▶ Fault is intermittent caused by poor contact of PCM/TCM & sencor and DTC was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair as necessary and go to "Verification Vehicle Repair" procedure.
	▶ Go to "Component Inspection" procedure.