This code is set when PCM/TCM detected that message is not received at communication line.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
No message from ECM | 1. Open or Short in CAN communication harness 2. PCM/TCM |
Enable Conditions |
•
Time after TCM turns on >0.5sec.
•
Input speed > 400rpm | |
Threshold value |
•
Message from ECM No message | |
Detecting Time |
•
More than 2sec. | |
Fail safe |
•
Engine speed:3000rpm
•
Throttle : 50%
•
Engine torque : Max*0.7 * Inhibit TIME OUT happen at BUS OFF happen. |
