This code is set when vehicle speed is above 20km/h but input speed signal is not detected by Input speed sensor.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Circuit no signal | 1. Signal citcuit open/short 2. Power supplied citcuit open/short 3. Input speed sensor 4. PCM/TCM |
Enable Conditions |
•
TR switch = "D"range
•
Battery voltage > 10V
•
Vehicle Speed > 20km/h
•
Engine speed > 400rpm | |
Threshold value |
•
Input speed = 0rpm | |
Detecting Time |
•
More than 4sec. | |
Fail safe |
•
Locked into 4th gear
•
Sports mode 2 <-> 3 <-> 4 possible
•
Teaching not allow |
