The Air conditioner Control Module sets DTC B1242 when evaporator sensor signal is at or over 4.9V for 0.3 seconds.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Monitoring the Voltage | 1. Poor connection in wiring harness 2. Open in signal circuit 3. Short to battery in signal circuit 4. Open in ground circuit 5. Faulty evaporator sensor 6. Faulty A/C control Module |
Enable Conditions |
•
IG KEY ON | |
Threshold value |
•
Evaporator sensor signal is at or over 4.9V for 0.3 seconds | |
Failsafe |
•
Control with the value of -2℃(28.4℉) |
