10998404

1.

Ignition "ON"& Engine "OFF".

2.

Connect scantool to Data Link Connector (DLC).

3.

Select "DTC Analysis" mode.

4.

After erase "Diagnostic Trouble Codes(DTC)", keep the vehicle condition within "the enable conditions".

(Refer to "DTC Detecting Condition" table)

5.

Is the same DTC occurred again?

	▶ Go to " Wiring Inspection " procedure .
	▶ Fault is intermittent caused by poor connection in connectors between SMK ECU and Bumper Antenna. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.