Check 'START RELAY' component coil resistance
IG KEY "OFF", ENGINE "OFF".
Disconnect 'START RELAY'.
Measure the resistance of 'START RELAY' component coil.
Specification :55±5 Ω (20℃)
Is the measured resistance within the specification?
 | ▶ Go to "2. Check 'START RELAY' component operation" as follows. |
 | ▶ Replace 'START RELAY' and go to "Verification of Vehicle Repair". |
Check 'START RELAY' component operation
IG KEY "OFF", ENGINE "OFF".
Disconnect 'START RELAY'.
Supplies random B+ and ground to coil sides of glow relay (terminal 85, terminal 86).
Check continuity between glow relay terminal 30 and terminal 87.
Specification : When power is supplied : Continuity (below 1.0Ω)
When power is not supplied : Discontinuity (Infinite Ω)
Is the measured resistance within the specification?
| ▶ Go to "Verification of Vehicle Repair". |
| ▶ Replace 'START RELAY' and go to "Verification of Vehicle Repair". |
※ Repeat this process 2~3 times.
