B101052 is set when variant coding is incorrectly performed as if "ESP CONTROL MODULE"(ESC) option is installed on the vehicle even though real vehicle has not ESC on the CAN BUS.
Item | Conditions for setting DTC | Possible Cause | |
DTC Strategy |
•
Check CAN communication | 1. Check option information and performance of cluster 2. Perform culster coding procedure 3. Check ESP CM 4. Check CAN line 5. Check Cluster | |
Enable Conditions |
•
IG key "ON" | ||
Case1 | Threshold Value |
•
ESC scan error | |
DTC Erasing Time |
•
In case of correctly performed coding procedure | ||
Case2 | Threshold Value |
•
End of line has ESC option information even though ESC has not been detected on the CAN BUS | |
DTC Erasing Time |
•
Erased DTC after solved problem | ||
Diagnostic Time |
•
500㎳ | ||
