EPS CM sets this code if EMS1 message is not received within predefined time.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
Check EMS11 message time interval. | 1. Open or short in CAN harness of engine side 2. Faulty ECM |
Enable Conditions |
•
IG key "ON" & Engine "ON" | |
Threshold Value |
•
EMS 11 message isn't received for more than 3s. | |
Fail Safe |
•
EPS CM sets vehicle speed as 80kph (50mile). | |
Restoration Conditions |
•
EMS 11 message is received Immediately. |
