EPS CM sets this code if ASP(Absolute Steering Position) zero setting is not done when EPS CM losses steering angle signal due to EPS alinment replace etc. EPS CM stops "damper" and "return" control due to loss of steering angle signal.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
ASP Setting Flag Check | 1. ASP setting is not done |
Enable Conditions |
•
Engine On | |
Threshold Value |
•
ASP Setting Flag ≠ 1 | |
Fail Safe |
•
Steering angle sensor signal is not available. | |
Restoration Conditions |
•
ASP Setting is done well |
