If the wrong clutch signal is continued for a certain period of time, a failure is recognized.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
Clutch monitoring | 1. Open or short clutch switch 2. Faulty clutch switch |
Enable Conditions |
•
1. During driving more than 60km/h and stop 5 times, there is no change of clutch switch state.
•
2. If the clutch switch state changed more than 80 times for 5sec. | |
Fail Safe |
•
Inhibit the DBC control and allow the ABS/EBD/ESP(ESC) control. | |
MIL |
•
The ESP(ESC) warning lamp is not activated. | |
Reset Condition |
•
1. Normal after IG turned on again and the state change of ESP(ESC) off switch is detected more than 5 times.
•
2. Normal after IG turned on again |
