B100051 means that it is not programmed cluster in the End of Line. Virgin status. After assembling vehicle or replacing cluster, it is essential to perform coding procedure for the cluster in order to put in the optional information.
If the coding procedure has not performed or made incorrect coding, this DTC will be set so that technicians can recognize it. This DTC can be set from assembly line and will be erased if the EOL programming is completed successfully.
※ Cluster message in case of virgin status or EOL programming error : "Coding error" will be displayed at LCD monitor on the cluster.
Item | Conditions for setting DTC | Possible Cause | |
DTC Strategy |
•
Check CAN communication | 1. Check option information and performance of cluster 2. Perform culster coding procedure 3. Check ABS/SRSCM/MDPS/ESP 4. Check CAN line 5. Check Cluster | |
Enable Conditions |
•
IG key "ON" | ||
Case1 | Threshold Value |
•
Not performed cluster coding | |
DTC Erasing Time |
•
Performed correct coding procedure | ||
Case2 | Threshold Value |
•
Failed initial coding performance | |
DTC Erasing Time |
•
Erased DTC after solved problem | ||
Diagnostic Time |
•
2,000㎳ | ||
