B251700 is set when the internal tail lamp("Illuminations") circuit is shorted to ground for more than 200㎳ during "Illuminations" operating.
Item | Conditions for setting DTC | Possible Cause | |
DTC Strategy |
•
Load mornitoring | 1. Short to ground in "Illuminations" power circuit 2. Faulty "Illuminations" | |
Enable Conditions |
•
The tail lamp switch "ON" | ||
Threshold Value |
•
The overcurrent is detected more than 4.4A at Internal Tail Lamp circuit | ||
Diagnostic Time |
•
Immediately | ||
DTC Erasing | Active |
•
IG key "OFF" after solved problem
•
Tail Lamp Switch "OFF" after solved problem | |
History |
•
Erased by GDS after solved problem | ||
