B251E00 is set when "REAR COMBINATION LAMP LH" circuit is shorted to ground for more than 200㎳ during the Stop Lamp operating.
Item | Conditions for setting DTC | Possible Cause | |
DTC Strategy |
•
Load mornitoring | 1. Short to ground in "REAR COMBINATION LAMP LH" power circuit 2. Faulty "REAR COMBINATION LAMP LH" | |
Enable Conditions |
•
Stop Lamp Switch "ON" | ||
Threshold Value |
•
The overcurrent is detected more than 5.8A at Left Stop Lamp circuit | ||
DTC Erasing | Active |
•
IG key "OFF" after solved problem
•
Stop Lamp Switch "OFF" after solved problem | |
History |
•
Erased by GDS after solved problem | ||
