B235400 is set when "DRL LAMP LH" or "RH" circuit is shotted to ground for more than 200㎳ during "DRL LAMP" operating.
Item | Conditions for setting DTC | Possible Cause | |
DTC Strategy |
•
Load mornitoring | 1. Short to ground in "DRL LAMP LH" circuit 2. Faulty "DRL LAMP LH" 3. Short to ground in "DRL LAMP RH" circuit 4. Faulty "DRL LAMP RH" | |
Enable Conditions |
•
DRL switch "ON" | ||
Threshold Value |
•
The overcurrent is detected more than 5A at Dedicated DRL Lamp LH circuit
•
The overcurrent is detected more than 5A at Dedicated DRL Lamp RH circuit | ||
Diagnostic Time |
•
Immediately | ||
DTC Erasing | Active |
•
DRL Lamp Switch "OFF"→"ON" after solved problem | |
History |
•
Erased by GDS after solved problem | ||
