B168A00 is set when B-CAN communication is normal, but "SMART KEY CONTROL MODULE"(SMK) cannot transmit B_CAN message to "BCM" for 10 sec.
Item | Conditions for setting DTC | Possible Cause |
DTC Strategy |
•
Check LIN communication | 1. Open/short in SMK's B_CAN "High" line 2. Open/short in SMK's B_CAN "Low" line 3. Faulty SJB |
Enable Conditions |
•
IG key "ON"
•
BCM CAN communication operating | |
Threshold Value |
•
SMK's B_CAN message is not received | |
Diagnostic Time |
•
10 sec | |
DTC Erasing |
•
Erased DTC after solved problem |
