11000868

1.

Ignition "OFF".

2.

Ignition "ON" & Engine "OFF".

3.

Connect GDS and select "Diagnostic Trouble Codes(DTC)" mode.

4.

Using a GDS, Clear DTC.

5.

Select "Diagnostic Trouble Codes(DTC)" mode again.

6.

Are any DTCs present?

▶ Substitute with a known-good steering column & EPS unit assembly check for proper operation.

If problem is corrected, replace steering column & EPS unit unit assembly and then go to "Verification of Vehicle Repair" procedure.

▶ Fault is intermittent caused by faulty EPS CM or was repaired and EPS CM memory was not cleared.

▶ Go to "Verification of Vehicle Repair" procedure.