EPS CM sets this code and turns on warning lamp if excessive low voltage caused by faulty alternator or poor connention in power supply circuit is detected.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
Battery Voltage Monitoring | 1. Open/short in power circuit 2. Faulty ground circuit 3. Faulty charging system 4. Over discharge |
Enable Conditions |
•
Engine "ON" | |
Threshold Value |
•
When Vbat is lower than 10V for more than 500ms. | |
Fail Safe |
•
EPS warning lamp "BLINKING" | |
Restoration Conditions |
•
When Vign is higher than 12V for more than 500ms. |
