Alternator
Item | Specification | |
Nominal output | 12V , 120A | |
Speed in use | 1,000 ~ 18,000 rpm | |
Voltage regulator | IC Regulator built in type | |
Regulator Setting Voltage | External mode | Refer to below graph |
Internal mode | 14.55 ± 0.3V | |
Temperature Gradient | External mode | 0 ± 3 mV / °C |
Internal mode | -3.5 ± 2mV / °C |
※Regulator Setting Voltage (External mode)
Battery
▷MF68L-BCI
Item | Specification |
Capacity [20HR/5HR] (AH) | 68/54 |
Cold Cranking Amperage (A) | 600 (SAE) / 480 (EN) |
Reserve Capacity (Min) | 110 |
Model type description
Cold Cranking Ampere (CCA): Cold Cranking Amps is a rating used in the battery industry to define a battery's ability to start an engine in cold temperatures.
The rating is the number of amps a new, fully charged battery can deliver at -18 °C(-0.4 °F) for 30 seconds, while maintaining a voltage of at least 7.2 volts for a 12 volt battery.
The higher the CCA rating, the greater the starting power of the battery.
RESERVE CAPACITY (RC) : Reserve Capacity is a battery industry rating, defining a battery's ability to power a vehicle with an inoperative alternator or fan belt.
The rating is the number of minutes a battery at 26.7 °C(80 °F) can be discharged at 25 amps and maintain a voltage of 10.5 volts for a 12 volt battery.
The higher the reserve rating, the longer your vehicle can operate should your alternator or fan belt fail.
Item | Specification | |
Rated voltage | 12 V, 1.7 kW | |
The number of pinion teeth | 11 | |
Performance [No-load, 11 V] | Ampere | Max. 70 A |
Speed | Min. 2,300 rpm |
Item | Specification | |
Type | Metal | |
Rated voltage (V) | 11 (20°C) | |
Resistance (Ω) | Normal | 0.4 ~ 10 [20 ~ 30 °C (68 ~ 86 °F)] |
Open | Over 10 [20 ~ 30 °C (68 ~ 86 °F)] | |
Short | Below 0.4 [20 ~ 30 °C (68 ~ 86 °F)] |
Item | Specification |
Rated voltage (V) | 12 |
Operate voltage (V) | 8 ~ 15 |
Item | N.m | kgf.m | lb-ft |
Alternator installation bolt | 38.2 ~ 58.8 | 3.9 ~ 6.0 | 28.2 ~ 43.4 |
Alternator B-terminal cable installation nut | 9.8 ~ 14.7 | 1.0 ~ 1.5 | 7.2 ~ 10.8 |
Battery (+) terminal tightening nut | 7.8 ~ 9.8 | 0.8 ~ 1.0 | 5.8 ~ 7.2 |
Battery (-) terminal l tightening nut | 3.9 ~ 5.9 | 0.4 ~ 0.6 | 2.9 ~ 4.3 |
Battery mounting bracket installation bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
Battery tray installation bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
Starter installation bolt | 49.0 ~ 63.7 | 5.0 ~ 6.5 | 36.2 ~ 47.0 |
Starter B-terminal cable installation nut | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
Glow plug plate installation nut | 1.3 ~ 2.0 | 0.13 ~ 0.20 | 0.96 ~ 1.48 |
Glow plug installation | 15.0 ~ 20.0 | 1.5 ~ 2.0 | 11.0 ~ 14.8 |