4.
Disconnect the radiator reservoir hose (B).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Disconnect the battery negative terminal.
Remove the air duct
(Refet to Intake And Exhaust System - " Air Cleaner")
Separate the filler neck (A) from the radiator upper member assembly.
Disconnect the radiator reservoir hose (B).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Disconnect the air duct(A).
Disconnect the cooling fan connector(A).
Remove the cooling fan (A) from the vehicle.
Tightening torque :
4.9 ~ 7.9 N.m (0.5 ~ 0.8 kgf.m, 3.6 ~ 5.8 lb-ft)
Install in the reverse order of removal.
Disconnect the wire harness connector (A) and the fan motor connector (B).
Remove the resistor (A) from the cooling fan shroud.
Tightening torque :
1.8 ~ 2.4 N.m (0.18 ~ 0.25 kgf.m, 1.3 ~ 1.8 lb-ft
Install in the reverse order of removal.
Remove the cooling fan (A) from the cooling fan assembly.
Disconnect the fan motor connector (A) from the resistor.
Remove the fan motor (B) from the cooling fan shroud.
Tightening torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
Install in the reverse order of removal.
Disconnect the fan motor connector from the resistor.
Connect the battery voltage to the "+" terminal and ground to "-" terminal.
Check the cooling fan motor operates well.
