Remove the automatic transaxle.

(Refer to Automatic Transaxle System - "Automatic Transaxle")

Remove the manual transaxle.

(Refer to Manual Transaxle System - "Manual Transaxle")

Automatic transaxle : Remove the drive plate.

(Refer to Cylinder Block - "Drive Plate")

Manual transaxle : Remove the flywheel.

(Refer to Cylinder Block - "Flywheel")

Remove the rear oil seal (A).

Install the rear oil seal.

(2)

Using the SST(09231-2A100, 09231-H1100) (A) and a hammer, tap in the oil seal until its surface is flush with the chamfer of cylinder block.

note

Always use new oil seal.

Install the other parts reverse order of removal.