4.
Disconnect the cooling fan connector (A).
Disconnect the battery negative terminal.
Remove the air duct and air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner)
Remove the intercooler outlet hose (A).
(Refer to Intake And Exhaust System - "Intercooler Pipe & Hose")
Disconnect the cooling fan connector (A).
Disconnect the over flow hose(A) and then remove the filler neck (B).
Remove the cooling fan (A).
Tightening torque :
4.9 ~ 7.8 N.m (0.5 ~ 0.8 kgf.m, 3.6 ~ 5.8 Ib-ft)
Installation is reverse order of removal.
Disconnect the battery negative terminal.
Remove the air duct and air cleaner assembly.
Disconnect the wire harness connector (A) and the fan motor connector (B).
Remove the resistor (A) from the cooling fan shroud.
Tightening torque :
2.8 ~ 3.2 N.m (0.28 ~ 0.33 kgf.m, 2.03 ~ 2.39 Ib-ft)
Installation is reverse order of removal.
Remove the cooling fan (A) from the cooling fan assembly.
Disconnect the fan motor connector (A) from the resistor.
Remove the fan motor (B) from the cooling fan shroud.
Install in the reverse order of removal.
