2.
Remove the filler neck mounting bolts (A) after opening the fuel filler door.
Turn the ignition switch OFF.
Remove the filler neck mounting bolts (A) after opening the fuel filler door.
Disconnect the fuel filler hose (A), the leveling hose quick-connector (B) and the ventilation tube quick-connector (C).
Remove the filler neck assembly after loosening the bolt (A) and nut (B).
Installation is reverse of removal.
Filler-neck assembly installation screw :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Filler-neck assembly bracket installation bolt :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
