1.
Remove the front wheel and tire (A).
Tightening torque :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
note
●
Be careful not to damage the hub bolts when removing the front wheel ＆ tire.
Remove the front wheel and tire (A).
Tightening torque :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
Be careful not to damage the hub bolts when removing the front wheel ＆ tire.
Remove the tie rod end ball joint.
Rmove the split pin (A).
Loosen the nut (B).
Separate the ball joint from the knuckle.
Tightening torque :
23.5 ~ 33.3 N.m (2.4 ~ 3.4 kgf.m, 17.4 ~ 24.6 lb-ft)
Remove the lower arm (B) from the knuckle by loosening the mounting nut (A).
Tightening torque :
78.5 ~ 88.3 N.m (8.0 ~ 9.0 kgf.m, 57.9 ~ 65.1 lb-ft)
Remove the front lower arm (A) and than loosen the bolts & nuts.
Tightening torque
Fornt : 117.7 ~ 137.3 N.m (12.0 ~ 14.0 kgf.m, 86.8 ~ 101.3 lb-ft)
Rear : 157.0 ~ 176.6 N.m (16.0 ~ 18.0 kgf.m, 115.7 ~ 130.1 lb-ft)
Install in the reverse order of removal.
Check the bushing for wear and deterioration.
Check the lower arm for bending or breakage.
Check the lower arm for deformation.
Check the all bolts and nuts.
