3.
Disconnect the ignition lock & clutch switch connector (A).
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the crash pad lower pannel.
(Refer to Body - "Crash Pad")
Disconnect the ignition lock & clutch switch connector (A).
Disconnect the push rod from the clutch pedal by removing the snap pin (A) and washer (B).
Remove the clutch pedal mounting nuts (C-4ea).
Tightening torque :
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 Ib-ft)
Remove the clutch pedal assembly from the vehicle.
Install in the reverse order of removal.
