2.
Disconnect the rear power window motor connector (A).
Remove the rear door window glass.
(Refer to Rear Door - "Rear Door Window Glass")
Disconnect the rear power window motor connector (A).
Loosen the rear door power window regulator mounting nuts.
Tightening torque :
3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2.9 ~ 4.3 lb-ft)
Remove the rear door power window regulator assembly (A).
After loosening the mounting screws, remove the rear door power window motor.
(Refer to Body Electrical System - "Power Window Motor")
Install in the reverse order of removal.
The area of whole parts should be applied with sufficient grease.
Make sure connectors are connected properly and each rod is connected securely.
Make sure the door locks/unlocks and opens/closes properly.
