4.
Loosen the front door latch (A) mounting screws.
Tightening torque :
7.8 ~ 10.8N.m (0.8 ~ 1.1kgf.m, 5.8 ~ 8.0 lb-ft)
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
Remove the rear door window glass.
(Refer to Rear Door - "Rear Door Window Glass")
Remove the rear door outside handle.
(Refer to Rear Door - "Rear Door Outside Handle")
Loosen the front door latch (A) mounting screws.
Tightening torque :
7.8 ~ 10.8N.m (0.8 ~ 1.1kgf.m, 5.8 ~ 8.0 lb-ft)
Disconnect the rear door latch connector (A).
Install in the reverse order of removal.
Make sure the connector is connected properly.
Make sure the door locks/unlocks and opens/closes properly.
Replace any damaged clips.
